- Joined
- Nov 7, 2007
- Messages
- 2,071
- Reaction score
- 1
- Location
- Antelope Valley CA
- First Name
- Scott
- Last Name
- Brown
I've wanted to move my handle bars up and back a little, so I am going to machine up a set of billet aluminum set back risers today for my 1250S.
I've decided to start out with moving the bars up and back 3/4 of an inch, and of course they will get a full polish job after their finished.
They have a m10 x 1.25 threaded mounting hole tapped in the bottom for mounting them to the triple trees with a hex head bolt.
Heres what they are going to look like.
I've decided to start out with moving the bars up and back 3/4 of an inch, and of course they will get a full polish job after their finished.
They have a m10 x 1.25 threaded mounting hole tapped in the bottom for mounting them to the triple trees with a hex head bolt.
Heres what they are going to look like.