• Welcome to the Two Wheeled Texans community! Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

Turn signals and SW-Motech racks

I assume you have put the metal spacers back in. If you take about 1/8" off each one, it will snug down a bit more. I'd put a big washer on the underside of the fender under each mounting nut to spread the load as it's just a big piece of plastic.
 
Back
Top