View Single Post
Old 07-02-2018, 08:13 AM   #225
Tundra Dweller
Tundra Dweller's Avatar
Join Date: Sep 2013
Location: Minnesnowda
Posts: 261
Re: The handlebar thread

Originally Posted by Sheriff View Post
Ah..That what i needed to know.. Thankyou...I like these ROX risers...A longer Brake line ..but what about the clutch line? Oh...mine is non ABS..does it still need to be longer?
Iím still using the stock Clutch Line. I would assume you would still need a longer brake line as the master cylinder line still travels down to the junction below the steering head. When changing the bars/ adding risers set it up with the bolts partially tightened and turn the bars to full lock both directions making sure there is no interference, overly tightend control lines or wiring and make sure the throttle cables are still slack. You may need to re-route some stuff, remove the metal hooks etc.
"When my time has come I prefer to be in the Saddle rather than the Recliner"

2008 Bandit 1250 SA
2013 BMW GS 650 Sertao
1975 Norton Commando 850
1974 Kawasaki H-1 500
Yes I ride all four
Tundra Dweller is offline   Reply With Quote
Page generated in 0.03671 seconds with 9 queries