Ayers Garage - Powder coating, ceramic coating, restoration - Page 3

**Morgan Buchanan** · 07-08-2012, 01:24 PM

Now that I have my tip over protection color matched, I can't begin to explain how much I want to do my rims! But it'll have to wait until I have a 2nd bike or a reason to be off mine for an extended period. I daily commute.... but DANG does Kevin do awesome work!

NPHLYT · 07-13-2012, 10:06 AM

Are you in Spring? I am looking to get some items powder coated, polished and ceramic coated (different parts for each...) and was interested in price for polishing. And, if you are in Spring, Texas then it would be an easy trip for me to drop the parts off.

Ayers Garage · 07-13-2012, 12:06 PM

Sorry, I'm in Springtown which is in Parker County, west of Fort Worth.

VFRRider · 07-14-2012, 11:29 PM

Kinda of a strange question, but can you do a black chrome on gun parts, namely the receiver and barrel? I was going for a deep S&W blue, but black would be fine.

Larry
VFRrider

NPHLYT · 07-15-2012, 04:13 AM

Quote:

Originally Posted by Ayers Garage

Sorry, I'm in Springtown which is in Parker County, west of Fort Worth.

Not a problem. What do you charge for polishing?

Ayers Garage · 07-16-2012, 06:22 AM

Quote:

Originally Posted by VFRRider

Kinda of a strange question, but can you do a black chrome on gun parts, namely the receiver and barrel? I was going for a deep S&W blue, but black would be fine.

Larry
VFRrider

I wish I could, but I can't legally do it. You have to be registered firearm refinisher to do that work.

Quote:

Originally Posted by NPHLYT

Not a problem. What do you charge for polishing?

I do very little polishing nowadays that isn't in conjunction with prepping for powdercoating. What do you have in mind ?

NPHLYT · 07-16-2012, 07:43 AM

For my CB750 I have 2 hubs and associated parts (rear drum), fork lowers (unless I powdercoat), and a few engine parts.
For my Puch I have a front and rear drum.

Ayers Garage · 07-17-2012, 07:20 PM

I think that's polishing beyond what I'd be comfortable with. My set up is just slightly better than typical home garage stuff and my skills are just good enough to polish small things in conjunction with powdercoating them part as a whole. I mainly do raised fins and logos and such like that.

NPHLYT · 07-18-2012, 03:26 AM

No problem. I was planning on getting the home polishing kit and using this as an excuse to get out of the house and into the garage.

DaveAlvarado · 07-27-2012, 11:15 AM

Triumph has a color called "Scorched Yellow". Do you have (or can you get) powder that would be a match for it? I've got a couple small parts I think I'd like to get matched--heel guards and radiator shrouds.

I've also got an exhaust I'd like to get ceramic coated black. Just need to teach a couple more BRCs to have the cash.

viper · 08-05-2012, 06:17 PM

I sent you a PM Kevin. I "liked" you on facebook as well. ~Mike Lambert

**Gravel Guy** · 11-19-2012, 05:04 AM

Quote:

Originally Posted by viper

I sent you a PM Kevin. I "liked" you on facebook as well. ~Mike Lambert

Anyone heard from Kevin lately? I can't find his web page or his business FB page!?

therealbigman · 11-19-2012, 07:08 AM

Quote:

Originally Posted by Gravel Guy

Anyone heard from Kevin lately? I can't find his web page or his business FB page!?

He told me a few months back , after I rec'd some stuff he sent ne back , that he was gonna get out the business cause " it just isnt worth it anymore "

I was like , what do you mean man , he seems to think he wasnt appreciated or was getting to many complaints or some such .

Hopefully he'll get back to it .

**M38A1** · 11-19-2012, 08:35 AM

That's sad. He did REALLY nice work....

therealbigman · 11-19-2012, 08:44 AM

As a matter of fact , I haven't noticed his banner in quite awhile either .

**cjeter** · 11-19-2012, 11:57 AM

I haven't seen him on any of the boards in a couple of months. Saw him on 820 one morning last week, kinda hard to talk there though. I did notice the business logos and all that were once on his vehicle were gone.

DoctorXRR · 11-21-2012, 08:21 PM

Kev did some fantastic work for me on my XR650R build, top notch. Maybe he needed some time to de-compress, and take stock of where things were going. Awesome guy who treated me real well!

**kurt** · 11-21-2012, 08:28 PM

What a shame if true, I was about to get him to do some crash bars for me.

~TABASCO~ · 11-27-2012, 03:05 PM

Quote:

Originally Posted by kurt

What a shame if true, I was about to get him to do some crash bars for me.

Kevin was doing all types of parts for us until one day about two months ago. I got a text that said he had been excepted to some school and he was leaving town and cant do any more powder coating. We had parts to be coated and he bailed out on the job. If I remember correctly the school was like six months long. I think he said he will be back about April ??? That was the last I ever heard from him.... He did nice work.

**Tourmeister** · 11-27-2012, 03:45 PM

Quote:

Originally Posted by therealbigman

As a matter of fact , I haven't noticed his banner in quite awhile either .

He stopped doing the banner when his last term expired and was just doing the subforum. His current 6 month subforum term expires in Feb of 2013. He has not been on the site since Sept. I have not heard anything from him regarding the business. I would hate to see him end his business. It seemed like he was getting quite a bit from TWT members, all of whom seemed very happy with his work.

07-08-2012, 01:24 PM	#41
Morgan Buchanan Forum Supporter Join Date: Jun 2006 Location: Lewisville Posts: 4,635	Re: Ayers Garage - Powder coating, ceramic coating, restoration Now that I have my tip over protection color matched, I can't begin to explain how much I want to do my rims! But it'll have to wait until I have a 2nd bike or a reason to be off mine for an extended period. I daily commute.... but DANG does Kevin do awesome work! __________________ 2010 Kawasaki Concours 1400 2004 Honda VTX 1800C, 2001 Kawasaki ZX-11, 2003 Honda VTX 1800C, 1991 Kawasaki ZX-11, 1988 Honda Hurricane 1000, 1985 Yamaha FZ750, 1981 Kawasaki KZ750, 1979 Suzuki GS750 COG#: 9384

07-13-2012, 10:06 AM	#42
NPHLYT Join Date: Aug 2007 Location: Houston Posts: 887	Re: Ayers Garage - Powder coating, ceramic coating, restoration Are you in Spring? I am looking to get some items powder coated, polished and ceramic coated (different parts for each...) and was interested in price for polishing. And, if you are in Spring, Texas then it would be an easy trip for me to drop the parts off. __________________ "I'm drowning, and monkeys dressed as lifeguards are throwing me anvils" -Dilbert NPHLYT 1962 Sears Allstate Puch 250 1970 Honda CB750 1979 Suzuki GS1000L 1980 Honda CB750K 2010 Harley Sportster 48 (turning gasoline into noise, without the side effect of H.P.)

07-13-2012, 12:06 PM	#43
Ayers Garage TWT Site Sponsor Join Date: Feb 2012 Location: Springtown Texas (west of DFW) Posts: 230	Sorry, I'm in Springtown which is in Parker County, west of Fort Worth. __________________ Ayers Garage- Custom Powdercoating Current bikes : Royal Enfield and a TW200

07-14-2012, 11:29 PM	#44
VFRRider Join Date: Mar 2003 Location: Garland, TX Posts: 400	Re: Ayers Garage - Powder coating, ceramic coating, restoration Kinda of a strange question, but can you do a black chrome on gun parts, namely the receiver and barrel? I was going for a deep S&W blue, but black would be fine. Larry VFRrider __________________ Larry Gates VFRRider 93 VFR in Pearl Crystal White

07-16-2012, 07:43 AM	#47
NPHLYT Join Date: Aug 2007 Location: Houston Posts: 887	Re: Ayers Garage - Powder coating, ceramic coating, restoration For my CB750 I have 2 hubs and associated parts (rear drum), fork lowers (unless I powdercoat), and a few engine parts. For my Puch I have a front and rear drum. __________________ "I'm drowning, and monkeys dressed as lifeguards are throwing me anvils" -Dilbert NPHLYT 1962 Sears Allstate Puch 250 1970 Honda CB750 1979 Suzuki GS1000L 1980 Honda CB750K 2010 Harley Sportster 48 (turning gasoline into noise, without the side effect of H.P.)

07-17-2012, 07:20 PM	#48
Ayers Garage TWT Site Sponsor Join Date: Feb 2012 Location: Springtown Texas (west of DFW) Posts: 230	Re: Ayers Garage - Powder coating, ceramic coating, restoration I think that's polishing beyond what I'd be comfortable with. My set up is just slightly better than typical home garage stuff and my skills are just good enough to polish small things in conjunction with powdercoating them part as a whole. I mainly do raised fins and logos and such like that. __________________ Ayers Garage- Custom Powdercoating Current bikes : Royal Enfield and a TW200

07-18-2012, 03:26 AM	#49
NPHLYT Join Date: Aug 2007 Location: Houston Posts: 887	Re: Ayers Garage - Powder coating, ceramic coating, restoration No problem. I was planning on getting the home polishing kit and using this as an excuse to get out of the house and into the garage. __________________ "I'm drowning, and monkeys dressed as lifeguards are throwing me anvils" -Dilbert NPHLYT 1962 Sears Allstate Puch 250 1970 Honda CB750 1979 Suzuki GS1000L 1980 Honda CB750K 2010 Harley Sportster 48 (turning gasoline into noise, without the side effect of H.P.)

07-27-2012, 11:15 AM	#50
DaveAlvarado Join Date: Mar 2010 Location: Fort Worth Posts: 926	Re: Ayers Garage - Powder coating, ceramic coating, restoration Triumph has a color called "Scorched Yellow". Do you have (or can you get) powder that would be a match for it? I've got a couple small parts I think I'd like to get matched--heel guards and radiator shrouds. I've also got an exhaust I'd like to get ceramic coated black. Just need to teach a couple more BRCs to have the cash. __________________ Motorcycle Math: 1 bike + 1 year = 2 bikes 2009 Versys 2006 Vulcan Nomad 2005 Speed Triple 1050 1997 DR350SE (sold) 2004 Speed Four (sold) 2008 ZX-6R (sold) 2008 Concours 14 (sold) 2007 Boulevard M50 (sold) 2006 Ninja 500 (sold)

08-05-2012, 06:17 PM	#51
viper Join Date: Oct 2011 Location: Elmendorf, Texas Posts: 71	Re: Ayers Garage - Powder coating, ceramic coating, restoration I sent you a PM Kevin. I "liked" you on facebook as well. ~Mike Lambert __________________ Mike "Better to burn out then fade away." ~ Highlander 2011 DRZ400S 2005 FXR Custom

11-19-2012, 08:35 AM	#54
M38A1 Administrator Forum Supporter Join Date: Nov 2006 Location: Capitol of Weirdness Posts: 12,165	Re: Ayers Garage - Powder coating, ceramic coating, restoration That's sad. He did REALLY nice work.... __________________ Scott 2002 R1150GS (I think I'm 'gonna just call it "Number 5") "I've been everywhere, man" 100K miles of smiles "Everyone should have something in their life that requires a helmet" - Ann Sweeney

11-19-2012, 08:44 AM	#55
therealbigman Join Date: Jun 2010 Location: On the coast South of Houston Posts: 1,786	Re: Ayers Garage - Powder coating, ceramic coating, restoration As a matter of fact , I haven't noticed his banner in quite awhile either . __________________ Marko 08 XR650l, ( 01 xr650l basket ), 84 ATC200S, 80 CT110, 80 C70 passport, 89 XL600V TA in Red , 89 XL600V TA in White in the past 84 FJ1100 84 ATC250R 83 ATC200X 73 XR75 74 XR75 2 75 ELSINORES 125 79 ELSINORE 250 and probably a couple of dozen ATC70'S THE FUNNEST 3 WHEELER EVER

11-19-2012, 11:57 AM	#56
cjeter Forum Supporter Join Date: Oct 2010 Location: N.Richland Hills Posts: 195	Re: Ayers Garage - Powder coating, ceramic coating, restoration I haven't seen him on any of the boards in a couple of months. Saw him on 820 one morning last week, kinda hard to talk there though. I did notice the business logos and all that were once on his vehicle were gone. __________________ - Curtis 2004 KLR 250 - needs to be replaced with something larger.

11-21-2012, 08:21 PM	#57
DoctorXRR Join Date: Aug 2009 Location: Austin, TX Posts: 269	Re: Ayers Garage - Powder coating, ceramic coating, restoration Kev did some fantastic work for me on my XR650R build, top notch. Maybe he needed some time to de-compress, and take stock of where things were going. Awesome guy who treated me real well! __________________ My XR650R Build: http://ridedualsport.com/forum/index.php?topic=2748.0 RideDualSport.com

11-21-2012, 08:28 PM	#58
kurt Administrator Forum Supporter Join Date: Nov 2003 Location: Cedar Park, Texas Posts: 17,292	Re: Ayers Garage - Powder coating, ceramic coating, restoration What a shame if true, I was about to get him to do some crash bars for me. __________________ 100 million gun owners didn't kill anyone last week.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode