mitchntx
Follower of Rev. Doug
- Joined
- Jun 11, 2006
- Messages
- 4,521
- Reaction score
- 1,513
- Location
- Whitney
- First Name
- Mitch
- Last Name
- Warren
I replaced bent OEM bars on an XR650L with Renthal highs.
Today was the first day I've spent some extended time standing and the bars just aren't high enough.
I have a set of Rox Risers, but can't decide if it's a good idea or not on a bike that will see 80/20 dirt over pavement. There is a lot of leverage generated on two weak links ... friction fit clamshell clamps.
So ...
Bad idea?
or
Shouldn't be a problem.
Today was the first day I've spent some extended time standing and the bars just aren't high enough.
I have a set of Rox Risers, but can't decide if it's a good idea or not on a bike that will see 80/20 dirt over pavement. There is a lot of leverage generated on two weak links ... friction fit clamshell clamps.
So ...
Bad idea?
or
Shouldn't be a problem.