too old
0
Are their any radiator shops in the austin area that will rod out/clean motorcycle rads?
-
Welcome to the Two Wheeled Texans community! 
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!
Radiators
- Thread starter too old
- Start date
aggie81
0
I can't say with absolute certainty, but I doubt that's an option with an aluminum radiator. Older automotive brass radiators could be easily unsoldered to remove the top and bottom for cleaning, but I suspect that all- aluminum motorcycle radiators wouldn't be so easily disassembled. It might, however, be possible to fill them with a caustic solution to remove at least some of the deposits.
- Joined
- Dec 18, 2009
- Messages
- 1,406
- Reaction score
- 58
- Location
- KYLE, TX
- First Name
- Sam
- Last Name
- Crabtree
Try DNT radiator at 705 St. Johns. They have fixed my 690R and 200xcw radiators and both are still holding years later. They also have a recycling business there so it does not look like much, but the work is good. I was turned on to them thru TJ's.
Sam
Sam