Welcome to the Two Wheeled Texans community! 
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to 
- Joined
- Dec 18, 2009
- Messages
- 1,406
- Reaction score
- 58
- Location
- KYLE, TX
- First Name
- Sam
- Last Name
- Crabtree
For Sale, Good paint, great drive train, lots of extras, quick little sport truck. It was my main transportation when I was traveling the state for the TSCEC. Reluctantly I have bought a new truck (4 door) 
and this one needs a more attention than I am willing to give it.
See description below. Let me know if you have any questions. I will list on other sale sites if no interest here.
1993 GMC Sierra SLE SWB Truck $6,000
Original Owner V-8 4L60E equipped 371K miles
Currently ’90 350 Camaro roller long block
Installed with less than 1K miles on motor @ 250K on truck 2005
Lower end has never been apart
Comp Cams 08-300-8 Camshaft Roller 450/480 262/264 112LSA
Roller tipped rockers 1417-16 and 981-16 springs pushrods
Edelbrock Port Fuel Injection system #3501 2009
Programed by Fuel Injection Speciaties
Jasper 4L60E transmission installed @ 295K
Front end rebuild all Moog parts 2010
Repaint 3/2008 original color
Rear sway bar added Helwig 7555 2003
Front Drop Spindles 2” - Rear shackle drop 4” 1997
’96 Impala 17” wheels - Changed Ring Gear & Pinion to 3:73 2006
Walker Cat Converter 6007 Installed 4/05
Head gaskets and Valve job 3/2016
Cruise control inop – Dash plastic carrier cracked
Volt gage reads high 2V– temp gage reads low 20 deg.
Right Exhaust Manifold cracked
Sam
and this one needs a more attention than I am willing to give it.See description below. Let me know if you have any questions. I will list on other sale sites if no interest here.
1993 GMC Sierra SLE SWB Truck $6,000
Original Owner V-8 4L60E equipped 371K miles
Currently ’90 350 Camaro roller long block
Installed with less than 1K miles on motor @ 250K on truck 2005
Lower end has never been apart
Comp Cams 08-300-8 Camshaft Roller 450/480 262/264 112LSA
Roller tipped rockers 1417-16 and 981-16 springs pushrods
Edelbrock Port Fuel Injection system #3501 2009
Programed by Fuel Injection Speciaties
Jasper 4L60E transmission installed @ 295K
Front end rebuild all Moog parts 2010
Repaint 3/2008 original color
Rear sway bar added Helwig 7555 2003
Front Drop Spindles 2” - Rear shackle drop 4” 1997
’96 Impala 17” wheels - Changed Ring Gear & Pinion to 3:73 2006
Walker Cat Converter 6007 Installed 4/05
Head gaskets and Valve job 3/2016
Cruise control inop – Dash plastic carrier cracked
Volt gage reads high 2V– temp gage reads low 20 deg.
Right Exhaust Manifold cracked
Sam
Last edited by a moderator: