I wanted to install a voltmeter and found these waterproof meters cheap.
https://www.ebay.com/itm/Mini-Waterproof-Round-Panel-DC-12V-Car-Boat-LED-Digital-Display-Voltmeter-/182551169633?var=&hash=item0
Drilled a 1-1/4"hole, used posi-taps on the right running light. I've had the heated grip switch in the same location on the other side for a couple years.
Better protection for the switch and the wires.
https://photos.app.goo.gl/DpQ44AK2dTueyWyj2
Used a bit of Elmers glue as plastic loctite on the backing nut...just in case I need to replace it. It works well and is very sensitive. I did check accuracy against a digital voltmeter.
https://photos.app.goo.gl/ZiqJYZSXV9MdydUA3
What can I say, long winter here on the Tundra.
https://www.ebay.com/itm/Mini-Waterproof-Round-Panel-DC-12V-Car-Boat-LED-Digital-Display-Voltmeter-/182551169633?var=&hash=item0
Drilled a 1-1/4"hole, used posi-taps on the right running light. I've had the heated grip switch in the same location on the other side for a couple years.
Better protection for the switch and the wires.
https://photos.app.goo.gl/DpQ44AK2dTueyWyj2
Used a bit of Elmers glue as plastic loctite on the backing nut...just in case I need to replace it. It works well and is very sensitive. I did check accuracy against a digital voltmeter.
https://photos.app.goo.gl/ZiqJYZSXV9MdydUA3
What can I say, long winter here on the Tundra.
Last edited: