Installed a new VM24 from Niche. When I turn the fuel petcock to ON, fuel flows out the bottom tubes. What do I need to adjust?
For grins I turned the bike on and it started right away. I left the petcock OFF so it would use the fuel in the carb. It did and died when it ran out, as expected.
Anyway, in the garage now. What can I do to fix this? On a '03 TTR125LE.
Thanks
Edit:
Pulled the bowl off, poked at the float, emptied the carb, put it all back together and back on the bike. Turned petcock on while holding the bike upright and it did just fine, no overflow. Put the bike back on the kick stand, played w the petcock and it overflowed fuel again. Turned it OFF. I don't know.
For grins I turned the bike on and it started right away. I left the petcock OFF so it would use the fuel in the carb. It did and died when it ran out, as expected.
Anyway, in the garage now. What can I do to fix this? On a '03 TTR125LE.
Thanks
Edit:
Pulled the bowl off, poked at the float, emptied the carb, put it all back together and back on the bike. Turned petcock on while holding the bike upright and it did just fine, no overflow. Put the bike back on the kick stand, played w the petcock and it overflowed fuel again. Turned it OFF. I don't know.
Last edited: