flipper
0
- Joined
- Jan 24, 2011
- Messages
- 34
- Reaction score
- 1
- Location
- Houston, Texas
- First Name
- Darrell
- Last Name
- Comeaux
Looking for recommendations for throttle lock for my DR650
Coat hanger.
And not the flimsy ones you use, the nice stout ones your wife uses.
To fab:
1. Cut the end off that goes around the bar. Or, use a straight section and bend it yourself. Should look like a "p". Or "b". Or "d". You get the idea....
2. Bend it to fit around your throttle. You will have to fiddle with the tension, to get it just right.
To use:
While holding throttle open, use index finger to move wire end to brake lever.
To un-use:
Twist throttle back to closed position.
Coat hanger.
And not the flimsy ones you use, the nice stout ones your wife uses.
To fab:
1. Cut the end off that goes around the bar. Or, use a straight section and bend it yourself. Should look like a "p". Or "b". Or "d". You get the idea....
2. Bend it to fit around your throttle. You will have to fiddle with the tension, to get it just right.
To use:
While holding throttle open, use index finger to move wire end to brake lever.
To un-use:
Twist throttle back to closed position.