- Joined
- Nov 17, 2003
- Messages
- 19,307
- Reaction score
- 7
- Location
- Lago Vista, Texas
- First Name
- Kurt
- Last Name
- Brown
I need to know precisely how thick it is from front to back. Thanks.
-
Welcome to the Two Wheeled Texans community! 
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!
Can someone measure a Zumo 660/665 for me?
- Thread starter kurt
- Start date
between .948 and .966 "
unless you mean the middle part where it goes in the bracket. that's .848-.858"
Disclaimers:
this particular 660 has slid (slided,slidden,/?) down a farm to market road at 65 mph
I used a harbor freight dial caliper
I haven't used a dial caliper in, well, a really long time
unless you mean the middle part where it goes in the bracket. that's .848-.858"
Disclaimers:
this particular 660 has slid (slided,slidden,/?) down a farm to market road at 65 mph
I used a harbor freight dial caliper
I haven't used a dial caliper in, well, a really long time
Not exact with a tape looks like 1"
- Joined
- Nov 17, 2003
- Messages
- 19,307
- Reaction score
- 7
- Location
- Lago Vista, Texas
- First Name
- Kurt
- Last Name
- Brown
Thanks!