XR650L supermoto rims/tires

[Cantex]

Sold my 2007 last week. New owner passed on the supermoto items. I bought the Bare Bones kit from Motostrano (http://www.motostrano.com/Supermoto-.../kit-bones.htm) and ran it on the bike for about 55 miles, then switched back to stock setup.
The kit came with wheels, rim strips, tubes, tires all separate, so I also incurred the cost of having them mounted at my local Honda dealer. The tires are Michelin Pilot Powers. I have everything that the kit came with, EXCEPT for the chain. It was a cheap, non-oring, and when I removed the supermoto setup, I cut it and tossed it in the trash. The wheels have been sitting in my garage for the past few months, and as such, have accumulated a bit of dust. There are a few tiny mounting marks on the front rim but they certainly aren't detracting.

-black Warp 9 rims with chrome hubs
-wheels with tires mounted, includes rotors and sprocket (40 tooth)
-front brake caliper relocator bracket
-wheel spacers
-new in package red UFO supermoto front fender (I used an old one I had around)

The wheels are a direct bolt up application for a Honda XR650L. You cannot use the stock speedo drive with these.

I really don't want to incur the cost of shipping due to the size of these items. I live in Port Arthur and would be willing to meet as far as Houston. Between all the people on this forum, I'm sure we could get them passed along to a new owner.

As you can see on the link to Motostrano, this kit sells for $1250 at the moment. I'd like to get $800 for everything.

Here's the setup on my bike:

[dutchinterceptor]

I'm interested! Do you have any pictures of the mounting damage to the wheels?

[Cantex]

Originally Posted by dutchinterceptor

I'm interested! Do you have any pictures of the mounting damage to the wheels?

I will try my best to get some pics posted this evening. Might not be able to fully catch it with my camera. We're talking small nicks, not big gouges, so it might be difficult to demonstrate in a photo. Definitely don't want to mislead anyone though, which is why I made sure to mention it in my opening post.
Thanks

[Cantex]

Okay, here's what I ended up with:

Front rim, with my thumb for reference:


Rear rim, seemingly "rub marks" rather than actual scratches. Possibly a good buffing job?




And finally, yes, a 40 tooth rear sprocket. Tape to help you count the teeth:


Bonus pic...lol. The zip ties are there to keep the spacers from ending up on the 'missing' list.

[Cantex]

One more week, then they're off to ebay.

[justaguy]

I am interested, but would need shipping. PM sent. Thanks

[justaguy]

ANY interest in shipping them?

[twinturbos-10]

sent you a pm

Originally Posted by justaguy

ANY interest in shipping them?