• Welcome to the Two Wheeled Texans community! Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

Dry clutch plate install specifies oiling plates ?

Joined
Dec 13, 2008
Messages
606
Reaction score
138
Location
wimberley,tx
My buddy's Bridgestone350 has a dry clutch and when he went to install
New plates he said he got instructions to oil the plates ?
Wet clutches yes but I never heard that for a dry clutch.
What say you ?
 
I had a Bridgestone 350 and the clutch was not dry.
 
^^^Bridgestone 350 GTO and GTR have dry clutches.
It does look like a wet clutch from the outside in your defense.
 
Last edited:
It has been a while. I also remember a left side kick. Am I wrong on that too? If so, I probably remember a different bike. Age has kicked in to negate my memory.
 
They did have a switcheroo going on but it was with the gearshift and the brake pedal....could put it on either side....other strange thing was neutral was at the top of the 6- speed gearbox.
 
Back
Top