• Welcome to the Two Wheeled Texans community! Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

CB350F Carbs

Forums New posts
Kilroy

Kilroy

0
Joined
Apr 25, 2007
Messages
574
Reaction score
213
Location
Austin, TX
Got a 74 CB350F from a friend after a couple of years of keeping it running for her. I've got the carbs mostly disassembled, and am wondering a couple of things:

1: Is factory jetting pretty good on these things? Any popular changes?

2: If I switched to pod air filters (because the stock airbox is broken), any changes to the jetting necessary? I'm not going to be riding this thing hard, just little putters around town.

3: Any other general thoughts on these things? Stuff I should be aware of as I attack them?

Thanks everyone! :rider:
 
If it was a twin I might be able to help. And I run stock size jets on all of them.
 
in 74 the jetting was pretty good but a switch to pods would require changes to jetting.
 
You must log in or register to reply here.
Back
Top