I recently purchased a 2002 BMW 1150 RT. It had been sitting for around 10 years. I have stripped all the tupperware off and removed the tank. The residual fuel came out like molasses. Went through 6 cans of carb and brake cleaner getting the initial sticky stuff off. This is not my first time to tear into a bike but it is the first time I have encountered a fuel system this fouled. The fuel Lines were totally eaten up by I assume ethanol. I have decided to replace all fuel lines, filters and couplers. I have pulled the injectors and cleaned them so they are good. I made me a test circuit with a momentary 12 volt switch using a syringe to pressure carb cleaner into it. I went to Max's site to buy fuel line, clamps and couplers and about had a heart attack when my cart hit $500 I will need fuel and vent lines that go inside the tank, does anyone have a suggestion as to a more reasonable place to purchase these items. I wanted to use the BMW style clamps on the fuel lines. Suggestions???