Welcome to the Two Wheeled Texans community! 
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to My bike started mis behaving not starting & throwing up Cp 14 code. I bought a new pattern tps ( didn't remove the original). Put bike into dealers, they checked everything. Changed plugs, cleaned all filters & Fi system and put on diagnostics. They changed tps & put pattern tps on. I picked the bike uo but it's running terribly. I think the issue may be the pattern tps.
I'm now thinkinh of buying & fitting a replacement set of throttle bodies with attached mikuni tps.
My question is if i fit them will i also need to change the Ecu as well from the same bike i get throttle bodies from or will the bike run with the the replacement throttle bodies and attached mikuni tps?
Any answers, thoughts or ideas appreciated.
I'm now thinkinh of buying & fitting a replacement set of throttle bodies with attached mikuni tps.
My question is if i fit them will i also need to change the Ecu as well from the same bike i get throttle bodies from or will the bike run with the the replacement throttle bodies and attached mikuni tps?
Any answers, thoughts or ideas appreciated.