• Welcome to the Two Wheeled Texans community! Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

DR650 Blowing Main Fuse

Forums New posts
Bigbuck5

Bigbuck5

Joined
Apr 14, 2024
Messages
30
Reaction score
19
Location
Rio Grande Valley
Hi all, I took my DR for a nice long ride in the country the other evening. On the way home it lost all power. After looking it over, I found the main fuse blown. I've checked the wiring harness for burned or damaged wires and can't find anything that looks bad. The only recent thing I did to the bike was clean, lube and adjust the chain. Any ideas?
 
Saw this yesterday and was coming back to respond. The wiring around the rear fender is sloppy. I pinched the tail light wire to the frame before and blew the main fuse, only after it burned the whole wiring harness up.
 
DanTex said:
Saw this yesterday and was coming back to respond. The wiring around the rear fender is sloppy. I pinched the tail light wire to the frame before and blew the main fuse, only after it burned the whole wiring harness up.
Click to expand...
Mine was already tiddied up around the fender, I someone else I talked to suggested the same thing. I was getting pretty frustrated trying to find any issue. After a couple days of looking, I saw it. It's already fixed, going to test it today. We have some nice cool weather over the next few days.
 
You must log in or register to reply here.
Back
Top