• Welcome to the Two Wheeled Texans community! Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

Flush Mount Wheel Chock

kubotamiketx

Forum Supporter
Joined
Feb 29, 2016
Messages
793
Location
Austin
Has anybody ever used or have a recommendation on a flush mount wheel chock?

I want to add a third one facing backwards in my trailer but want to have it flush mount if they are practical and work...

Here is a link to one that I found. Sounds like I would have to router out a pocket so deep it may even stick out the bottom. Actually need to try and measure how thick the floor deck is to even see if this would work.

http://pitposse.com/porewhchst.html

https://www.amazon.com/dp/B005SUWZ8C/?tag=twowhetex-20
 
Joined
Apr 10, 2007
Messages
1,150
Location
Heartland, Tx
My buddy has some in his enclosed trailer like that. Dirt bikes though. Not street bikes.
They have worked for many years. You can also get some of the pingle ones that are removable when not in use.
 
Top