jqueen
0
Dont have my ktm any longer, cleaning out garage. Parts are in Argyle (south of Denton). Local pickup preferred, will ship if you cover. Can deliver to pie runs, etc.
Rear sprocket- $ 15.00. 50 tooth, steel, fits a ton of bikes- see here: https://www.roadrunnermoto.com.au/ktm-54650-ktm-steel-rear-sprocket-50t-primary-driv~6793
Front sprocket 13t. Will probably fit most of the full size, but I know it fits 2007 300xc.
Extra large fuel tank, not sure size but a lot bigger than stock. $20. Should fit all the full size 2 strokes with same frame as 2007 300xc, but I've only put it on a 2007 300xc, so check that for yourself.. will include a petcock that works but broken lever- have to use pliers to turn it.
Enduro engineering seat- $25. A little taller, a lot plusher than standard ktm seat. Should fit most ktms of this frame.
FMF gnarly pipe- $25. You can see it's a little dented but no impact to performance. Also you can see I welded up a crack. Its ugly but it holds. Will include handful of exhaust prints as well. I think this may work for 250's as well.
Countershaft seal set- free!
Rear sprocket- $ 15.00. 50 tooth, steel, fits a ton of bikes- see here: https://www.roadrunnermoto.com.au/ktm-54650-ktm-steel-rear-sprocket-50t-primary-driv~6793
Front sprocket 13t. Will probably fit most of the full size, but I know it fits 2007 300xc.
Extra large fuel tank, not sure size but a lot bigger than stock. $20. Should fit all the full size 2 strokes with same frame as 2007 300xc, but I've only put it on a 2007 300xc, so check that for yourself.. will include a petcock that works but broken lever- have to use pliers to turn it.
Enduro engineering seat- $25. A little taller, a lot plusher than standard ktm seat. Should fit most ktms of this frame.
FMF gnarly pipe- $25. You can see it's a little dented but no impact to performance. Also you can see I welded up a crack. Its ugly but it holds. Will include handful of exhaust prints as well. I think this may work for 250's as well.
Countershaft seal set- free!