Awesome, great to see your back on your feet.
What forks did you use?
What forks did you use?
Awesome, great to see your back on your feet.
What forks did you use?
Great work as usual from you
is this exhaust sectional or full one piece?
What dimensions you have built this exhaust Buddy?
finally dyno day and i have the result of my home made header. Not the best but also not the worst result. Down low needs some fuel adjustment for that deep so it should be smaller difference.
I was hopping to be better at wider range on top end. It works good for the last 1500 revs. Below is about 1 to 2 hp less.
Probably it will work better with the bigger inlet camshaft on top end.
Overall i think it worked good. Note that the temperature is 36C !! way to hot!!
Yes i know, 36c is not for dynoday but i wanted to see the diference of the 2 headers and not the best power. On an day with 20c probaply it will be at least 3-4 hp more.
Both dyno are the same day for accurate result
Yes i know, 36c is not for dynoday but i wanted to see the diference of the 2 headers and not the best power. On an day with 20c probaply it will be at least 3-4 hp more.
Both dyno are the same day for accurate result
Yes, this is with yoshi camshaft and more compression. No headwork.
Interestingly I met a person recently who had put GSXR1100 head and cams on the Bandit 1250. He mentioned he put some AN fittings for the oil routing. Would be interesting to find how much it makes on the dyno.
He is the original owner of this mod and content. He said he wanted to share a write up on it here on the forum. I will find it out more from him later.
I do not see any advance on using that head except using the bigger throttle bodies. But as i see he kept bandit's one.
Now i am in the process to put a bigger inlet camshaft. I am hoping to go near 170 hp. Finger crossed
GSXR1100 made 110hp from memory so no advantage I can really see. I might be missing something. Unless he meant GSXR1000 head?
So you might sell me your Yoshi cams soon then?
Hmm... i dont recall seeing 1320 build. If you can find a link, please post up..That would be awesome!