Welcome to the Two Wheeled Texans community! 
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to 
- Joined
- Mar 5, 2008
- Messages
- 9,085
- Reaction score
- 1,838
- Location
- Where the road leads ya.... Or Waco
- First Name
- Rod
- Last Name
- Powers
PhilHlii's farkles
These up & back style Rox Risers will fit a wide variety of bikes. & include all mounting hdw + some extra custom vibration dampers.
Use w/o shims for 1 1/8" bars
Shims for 7/8" size bars
Rubber shims & pins if you want to fit vibration dampening to the 7/8" setup instead.
Description from web...
Rox new offset block Riser raises your bar straight up 1¼" (vertical) or up 1" and back 1" when installed the other direction. Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center to center distance with 8mm bolt threads acting as a fat-bar adaptor or they will work to raise your stock fat-bars on BMW's (not 08-up Adventure), KTM's and more. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.
$50 + ship or pick up in Waco
ATTN: New members must have a min of 5 TWT posts to purchase from me.
This is due to the increase in folks jus joinin the forums to buy stuff or get free stuff....leavin active & longtime members out of the picture.
These up & back style Rox Risers will fit a wide variety of bikes. & include all mounting hdw + some extra custom vibration dampers.
Use w/o shims for 1 1/8" bars
Shims for 7/8" size bars
Rubber shims & pins if you want to fit vibration dampening to the 7/8" setup instead.
Description from web...
Rox new offset block Riser raises your bar straight up 1¼" (vertical) or up 1" and back 1" when installed the other direction. Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center to center distance with 8mm bolt threads acting as a fat-bar adaptor or they will work to raise your stock fat-bars on BMW's (not 08-up Adventure), KTM's and more. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.
$50 + ship or pick up in Waco
ATTN: New members must have a min of 5 TWT posts to purchase from me.
This is due to the increase in folks jus joinin the forums to buy stuff or get free stuff....leavin active & longtime members out of the picture.
Attachments
Last edited: