ntklr650
Matt6:34
- Joined
- Jun 13, 2014
- Messages
- 3,910
- Reaction score
- 3,256
- Location
- Krum Tx
- First Name
- Michael
- Last Name
- M
Today I was able to install my new top box I ordered for my KLR. I ordered a Seahorse SE540 case with metal locking tabs. The dimensions are:
Exterior: 14.9 x 12.13 x 9.58"
Interior: 13.52 x 9.92 x 8.38”
For mounting, I pulled 4 capscrews in my rack plate and got longer screws. I made a template from the rack and transfered the hole pattern to the box and drilled.
I need to get some longer screws as I need to add a washer for better support.
I mounted it back far enough that I could still remove my seat without pulling the box and I also have plenty of room to ride two up with the kids. ( Both had to climb on and try).
Overall I am pleased with it for the cost $75 delivered plus mounting hardware.
Sent from my Moto G (4) using Tapatalk
Exterior: 14.9 x 12.13 x 9.58"
Interior: 13.52 x 9.92 x 8.38”
For mounting, I pulled 4 capscrews in my rack plate and got longer screws. I made a template from the rack and transfered the hole pattern to the box and drilled.
I need to get some longer screws as I need to add a washer for better support.
I mounted it back far enough that I could still remove my seat without pulling the box and I also have plenty of room to ride two up with the kids. ( Both had to climb on and try).
Overall I am pleased with it for the cost $75 delivered plus mounting hardware.
Sent from my Moto G (4) using Tapatalk
Last edited: