Hey guys,
I am normally pretty mechanically competent, but I am unable to remove one of the bolts in-order to remove my seat.
The seat has two retaining bolts with the "nut" portion attached to the bracket..aka not a loose bolt but one attached to the mounting bracket.
Anyways I was able to unscrew one, but the other just spins freely in both directions. I felt around the back of the bracket and it does not seems as if the "nut" broke loose and is spinning freely with the bolt.
Only thing I can think is that the bolt is stripped, but I am unable to pull it out with vice-grips or get it to lift up at all. Normally, I should be able to pull it out or at least lift it out a little.
Any suggestions before I drill it out?
Hope I made sense.
I am normally pretty mechanically competent, but I am unable to remove one of the bolts in-order to remove my seat.
The seat has two retaining bolts with the "nut" portion attached to the bracket..aka not a loose bolt but one attached to the mounting bracket.
Anyways I was able to unscrew one, but the other just spins freely in both directions. I felt around the back of the bracket and it does not seems as if the "nut" broke loose and is spinning freely with the bolt.
Only thing I can think is that the bolt is stripped, but I am unable to pull it out with vice-grips or get it to lift up at all. Normally, I should be able to pull it out or at least lift it out a little.
Any suggestions before I drill it out?
Hope I made sense.