92TDM850
0
- Joined
- Mar 31, 2015
- Messages
- 27
- Reaction score
- 5
- Location
- San Antonio
- First Name
- Matthew
- Last Name
- Warren
Looking for an aftermarket seat for my 2009 Kawasaki Versys 650. - Sargent - Corbin - Seat Concepts - ?
-
Welcome to the Two Wheeled Texans community! 
Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!
WTB - Aftermarket Seat for 2009 Kawasaki Versys 650
- Thread starter 92TDM850
- Start date
- Joined
- Apr 9, 2018
- Messages
- 1,068
- Reaction score
- 1,141
- Location
- Friendswood
- First Name
- Randy
- Last Name
- Jacobs
Best seat you can get for a Versys ( and many other bikes too) Check it out.
www.terryscustomseats.com
Randy
Home | terryscustomseats
- Joined
- Oct 12, 2011
- Messages
- 952
- Reaction score
- 11
- Location
- Haslet,Tx. Norwalk,Ca.
- First Name
- Joseph
- Last Name
- Wells III
Randy's right. I went through 7 seats on my 09 Versys 650. Corbin was the worst.....I had Terry make me a flat seat to get rid of the pillion hump so i could ride back farther on the seat to stretch out my hips and knees. So when i got my Versys 1000 I knew who to call and had Terry make a flat seat for it....
IMG_1503 by weljo2001, on Flickr
Terry's Custom Seat's Flat Seat For Versys 1000 by weljo2001, on Flickr
92TDM850
0
- Joined
- Mar 31, 2015
- Messages
- 27
- Reaction score
- 5
- Location
- San Antonio
- First Name
- Matthew
- Last Name
- Warren
Thanks Randy.Best seat you can get for a Versys ( and many other bikes too) Check it out.
RandyHome | terryscustomseats
Is the flat seat higher than the stock seat ? If so how much? Looks like it gives you plenty of room to move around.
- Joined
- Oct 12, 2011
- Messages
- 952
- Reaction score
- 11
- Location
- Haslet,Tx. Norwalk,Ca.
- First Name
- Joseph
- Last Name
- Wells III
Yes it is. Not sure how much. But he goes off the measurements you give him. With me I'm 6'2" 32-33 inseam. Gives you lots of room to move around. Along with my MotoWerks Highway Peg Mounts and Rivcco Anti-Vibe Pegs its really comfy.. Photos compared to stock.
- Joined
- Apr 9, 2018
- Messages
- 1,068
- Reaction score
- 1,141
- Location
- Friendswood
- First Name
- Randy
- Last Name
- Jacobs
Here are my seats on my Versys and my BMW. Mine are Terry's more traditional seats. They are all-day comfortable.
- Joined
- Apr 9, 2018
- Messages
- 1,068
- Reaction score
- 1,141
- Location
- Friendswood
- First Name
- Randy
- Last Name
- Jacobs
I am at the other extreme. I have a 29" inseam, so I needed the lowest seat height possible and got it with no compromise in comfort.
I have a 2009 Versys as well and I just cut out about 1 inch of foam from the seat and then put a "kneeling pad" from the garden section of home depot to replace what I had cut out. Its comfy, but not quite as comfy as I would like. So far my longest ride has been about 2-3 hours. I also have a 29 inch inseam.
Fiskars 15.88 in. L x 10.5 in. W x 1.5 in. Kneeling Cushion 94216974J - The Home Depot
Thick for added comfort, the Fiskars Kneeling Cushion protects your knees, both in the garden or around the house. With dual-layer construction for lasting durability and superior comfort, this cushion
www.homedepot.com