- Joined
- Oct 12, 2011
- Messages
- 952
- Reaction score
- 11
- Location
- Haslet,Tx. Norwalk,Ca.
- First Name
- Joseph
- Last Name
- Wells III
Got my bike back last friday and there were a few service issues when in there but when i was told it was ready. I get there to see one of the pegs to be replaced wasn't then i open my new top case to put stuff in it and the top case lights are just laying inside. So got with the service writer who got with the tech that took the light kit out of the old case and was suppose to install in the new one. He said he wasn't getting any power and checked it. I knew they were working when i brought it in. So i'm getting a little pissed and the service writer said he can order the part from Admore to fix it. I said F- it i just want to go. So he's really trying to make it right saying they'll cover the cost and what-not. I told him it was just probably a loose wire at the harness that probably got tugged on so i would check it when i got home. Got home took off the seat and looked at the harness. Yep one wire sticking out so i fixed it and connect the wiring together to see if it worked and it did. So kinda pissed if they would have went ahead and drilled the hole i could have installed it myself. Told them i would be in today for them to finish up the job. But on friday i sent a video of how to run the wiring and the holes that would need to be drilled and sent then the link to the instructions from Admore web-site.
Hello Brian,
Hers a couple of things that will come in handy……
1.[ame="https://www.youtube.com/watch?v=I6hNAdZ8Fqs"]E55 Top Case AdMore LED Lighting kit install - YouTube[/ame]
2.https://admorelighting.com/Web Instructions/AdMore LED55-T-TS CG Installation Instructions.pdf
Thanks,
Joseph
Took it in today and waited for them to get it done so when the bring it to me he shows me that everything works correctly except a few of the running lights on the right blinker. So i said i would look at it when i got home. Well had to run some errands and was putting my jacket and helmet in the top case and noticed how they ran the wires....Bingo i think i found the problem.....
P1020080 by weljo2001, on Flickr
P1020081 by weljo2001, on Flickr
P1020082 by weljo2001, on Flickr
I know I'm kinda picky but this is just sloppy work. I even asked did the same guy take the light kit out of the old case and they said yes...So he knew how the new one should be done and 2 holes would have to be drilled to run the wires. Maybe he's just lazy or doesn't give a crap..
Hello Brian,
Hers a couple of things that will come in handy……
1.[ame="https://www.youtube.com/watch?v=I6hNAdZ8Fqs"]E55 Top Case AdMore LED Lighting kit install - YouTube[/ame]
2.https://admorelighting.com/Web Instructions/AdMore LED55-T-TS CG Installation Instructions.pdf
Thanks,
Joseph
Took it in today and waited for them to get it done so when the bring it to me he shows me that everything works correctly except a few of the running lights on the right blinker. So i said i would look at it when i got home. Well had to run some errands and was putting my jacket and helmet in the top case and noticed how they ran the wires....Bingo i think i found the problem.....
I know I'm kinda picky but this is just sloppy work. I even asked did the same guy take the light kit out of the old case and they said yes...So he knew how the new one should be done and 2 holes would have to be drilled to run the wires. Maybe he's just lazy or doesn't give a crap..
Last edited: